Water Treatment Oil and Gas
Purpose of Reverse Osmosis Systems is toÂ support and helpÂ treatment of oil contaminated waterÂ to recover petroleum oils that are found in water bodies at several stations.
- Free non-emulsified oils
- Emulsified oils and stable in the water
- Insoluble solids
The principles of the separation, recovery and water treatment oil and gas depends on characteristics and properties of these oils; the nature and existence, solid materials and non-emulsified oils areÂ physically separatedÂ whileÂ emulsified oils are chemically separated. Finally, small emulsions and organic dissolved material which were not treated with previous means are being treated biologically.
Stages and methods for water treatment oil and gas
Contaminated water are beingÂ processedÂ byÂ three phases depending on the method of processing which are:
- Physical treatment
- Chemical processing treatment
- Biological treatment stage
Solid matters and non-emulsified oils are separated based on the principle of gravity, where design breaks is returnedÂ to the American Petroleum Institute, which the design depends on the principle of the difference in density between the water and oils properties, whether free or solid.Â Free oils float on the surface of the water and taken by a certain abrasive raze to a special hole to be returned again after layering toÂ the production lines while the solid matters settleÂ atÂ the bottom of these basins are taken through a private in the form of sludge sockets to private places where follow up treatment and disposal.
Chemical processing treatment
Emulsified oils can not be separated physically so it needs to be separatedÂ chemicallyÂ which allows to remove the case of emulsification and stability emerging between oil and water in the middle surroundingÂ theÂ second phase.
Where external water are brought from external basins afterÂ adding some coagulated materials such as iron sulfate which is less expensive than other coagulated materials and because they in fact do two jobs.
Forms (after oxidation by dissolved oxygen moiety) hydroxide compound of iron gelatin textures and surface, which has a capacity thatÂ helps adsorption of emulsified oil droplets on the surface and the air with the help of the dissolved.
The addition of iron sulfate helps in getting rid of hydrogen sulfide gas dissolved and compoundsÂ which may be contained with oily water, which have seriously damaged the subsequent biological treatment work, where the presence of iron sulfide is a moiety with ion iron deposit is a black iron sulfide.
After the formation of the raw material adsorption (ferric hydroxide) a polymer is added with high molecular weights that carriesÂ an electric positive charge on the surface collects iron hydroxide particles on the surface compounds the problem so volumes and surfaces wide capable of dissolved air flotation, which will inject later assisted.
Complete chemical treatment of so-called phase flotation stage, a very important and very critical stage in the improvement of the final specifications for water treatment and symbolized by the acronym of the dissolved air flotation.
The principle of this method depends on the density change problem solids by adding the previous chemicals by joining the air bubbles injected by a private network at the bottom of the tub to the surfaces of these pendants and its contribution to the expansion of the relative surfaces and thus reduce the intensity of which will allow its flotation.
In other words, what is meant by flotation in fact is the updraft of adsorption materials that will contribute to the adsorption of emulsified oil droplets at the same time also pick up solid natural pendants which we call water turbidity collected on the surface of the flotation tanks.
Then to be taken by a special razeÂ gathered in private protectors called flotation sludge pit.
Biological treatment stage
Emerging from the flotation stage water enters the biological treatment providers basins mechanical mixers are secure ventilation of these basins and providing oxygen required for processes of oxidation where this method is the most common and successful way in converting organic material, whether decadent or sizes minutes impossible separated previous stages to non-material decadent through oxidized by microorganisms (bacteria) that are converted via vital metabolism to carbon dioxide and to new microorganisms called bacterial midwife to be placed at the bottom attached to the biological reactors settling basins and described in the third stage in the scheme.
Many of the microorganisms can feed on organic material dissolved or suspended and disassembled condition of maintaining the appropriate conditions of her life and, in particular, needs oxygen.
And measured the water content of organic material degradable bacteria, including the requirement we call organic oxygen: BOD Biochemical Oxygen Demand.
This standard represents the amount of oxygen consumed by bacteria to represent this organic material and can be called organic pregnancy basin biological When this pregnancy is fairly low and if there is sufficient tracts of land are designed in this case the biological basins Allagoonat system or open pits where believes bacteria which need oxygen directly from the natural air.
But if the high organic load must in this case from those basins oxygen supply mechanical means which are periodically required to secure for the entire basin ventilation.
UpstreamÂ andÂ DownstreamÂ Water Treatment in Oil and Gas Industry
Water is a key element for the upstream and downstream Oil and Gas industry, from oil fields exploration to oil and gas production. Water quality is crucial for both Chemical Enhanced Oil Recovery and Enhanced Oil Recovery (EOR), whether it was for reuse or discharge; in order to meet discharge limits.
For many years, Oil and Gas industry has experienced important changes in both upstream and downstream sectors. Wastewater and Water treatment in oil and gas industry has always remained a key element for successful activities and processes.
Applied Water Technology CompanyÂ providesÂ advanced solutions for the offshore and onshore water treatment in Oil and Gas industry to ensure the customer’s productivity, efficiency and safety manners in the refining process operation. We carry a vast range of water and wastewater treatment plants, reverse osmosis systems, purification products and solutions that apply the latest technologies, expertise and knowledge. We strive to serve and provide all the Oil and Gas companies on both onshore or offshore platforms with integrated solutions that allow them to meet their water treatment and wastewater needs.
We offer the following:
– External water source for injection:
It depends on the water resource available; whether seawater, brackish water or freshwater and on the water quality required by reservoirs. No matter what is the source of water and its quality, AWT manufactures water treatment solutions to produce Injection Water that meets and exceeds the customers’ requirements, expectation and satisfaction.
– Produced Water and Wastewater:
Exploration and production activity generates produced Water that needs to be treated in order to be reuse or discharged to the environment following standards and limitations.
– Reused and Produced Water reinjection:
External water source consumption is limited by the recycling of produced water.
AWT designs and manufactures systems and solutions for water treatment in oil and gas for offshore and onshore oil platforms that produce injection water with high quality; that do not cause corrosion or indirect decreased oil production. AWT water treatment process lines meet reservoirs and local regulations and environmental constraints requirements. Our solutions are cost effective and optimized to solve your complex problems whether in the upstream or downstream oil and gas sectors and whether offshore or onshore platform operation.
Applied Water Technology Company integrates its technical expertise for sustainable management and best solutions for the water treamtnet in Oil and Gas industry water recycle.
Water pollution is basically any chemical, physical or biological change in the water quality that is harmful to any living object that drinks it, uses it or lives in it. Polluted water has a direct effect on humans’ health. Water pollution is a large set of adverse effects upon water bodies – such as lakes, rivers, oceans and groundwater – caused by different human activities.
Bqua offers sustainable and cost-effective water treatment system and water treatment solutions for residential, commercial and industrial applications. Our water treatment system is sustainable, reliable, cost-effective and future proof. We value our customers with skilled workmanship, craftsmanship and customer service excellence. We strive to serve you with our dedicated team of professionals to find you the right water treatment solution that addresses your needs.
As a water treatment system manufacturer and integrator, bqua offers a broad range of smart and innovative water treatment solutions. We implement the latest technologies in order to solve the toughest and most complex water treatment problems. Below are typical water problems that people all over the world may face in their drinking water supplies. Bqua is proudly capable of introducing water treatment solutions that will make your life much easier and healthier.